NEW
PRODUCT
SEARCH!
As we've mentioned in a previous post, cylinder head damage is a major issue that can cause problems throughout your engine. It's not just cracks that you have to worry about.
Both warped and pitted or corroded heads can cause just as much damage, and can masquerade as issues with your head gasket. Both problems create sealing issues, which lead to leaks and other damage.
That's why it's so important to always find the reason your gasket failed. It doesn't usually just happen on its own.
WARPED CYLINDER HEADS
Warping of the cylinder head is caused by conditions similar to cracking, namely overheating. When a head is heated past normal operating temperatures, it expands past its limits.
As it cools, the head often will not return to its original size or shape, instead settling into a more bent or distorted form. Repeated too many times and this will cause cracks in the head.
What's Wrong With a Warped Cylinder Head?
A warped head is dangerous for more than being a precursor to cracks, though. It will eventually cause gasket failure, and depending on the amount of warpage, can allow for leaks.
What to Do If Your Cylinder Head is Warped
The cylinder head should, at the very least, be reground flat to regain a good seal, but it's likely that it will need to be replaced altogether, especially if the head is quite warped. If it's not addressed, it will continue to damage your head gasket and cause further engine damage.
A straightedge and a feeler blade are used to help tell if a cylinder head has warped beyond being usable. Depending on the engine type, some warp is fine, but the range varies. Ideally, the cylinder head will sit flat on the gasket, creating a tight seal for combustion.
PITTED OR CORRODED CYLINDER HEADS
Similarly, a heavily pitted head will not seal correctly. A severely damaged surface will need to be replaced to maintain a proper seal for combustion.
Corrosion can both be caused by cooling system issues, as well as lead to increased problems with the cooling system. The corrosion/pitting can allow for coolant to leak into the cylinders, causing increased engine damage, oil contamination, and leading to more pitting, particularly on the engine block.
WHY YOU SHOULD PAY ATTENTION TO THE HEALTH OF YOUR CYLINDER HEAD
If these problems are severe and the seal between the head and gasket is poor, you can end up with even more engine problems. The poor seal will not allow for proper combustion, impacting your engine's performance.
Oil and coolant can leak out of the head and the two can mix together, rather than keeping them contained to their proper channels. Oil could also leak into the combustion chamber, affecting efficiency and leading to higher oil consumption.
Other Issues You Might Notice in Your Cylinder Head
These issues, since they affect the head gasket so much, can often point to gasket issues alone, but that's rarely the case. If you're having a gasket issue, you're probably experiencing other problems as well.
That's why it's important to be able to identify the actual cause of the issue, otherwise you'll continually be spending money on new gaskets while the real issues become worse and worse.
If you're experiencing a warped or pitted cylinder head, it might be time to consider a new one, especially as a machine shop often will not be able to repair a more seriously damaged head.
How HHP Can Help With Your Cylinder Head Problems
If you're experiencing a warped or pitted cylinder head, it might be time to consider a new one, especially as a machine shop often will not be able to repair a more seriously damaged head.
Our on-staff, ASE Certified Technicians can help you diagnose your diesel engine problems and ensure you're getting the right parts for the job.
Highway & Heavy Parts carries only the highest quality replacement parts for your diesel engine, sourced from the best manufacturers.
We are a one-stop shopping source for all your diesel engine needs. You can call or shop online. We have a huge inventory of replacement parts, including cylinder heads, and most ship in two days or well.
With parts backed by industry leading warranties, Highway & Heavy Parts is here to help get you back up and running fast!
CYLINDER HEAD & COMPONENTS RESOURCES
Related Articles:
CYLINDER HEAD FAILURE ANALYSIS: WHY IS MY HEAD CRACKED?
HOW TO INSTALL A DIESEL ENGINE CYLINDER HEAD
WHAT GOES INTO A REMANUFACTURED CYLINDER HEAD FROM HHP?
SIGNS YOU NEED TO REPLACE YOUR CYLINDER HEAD
Related Videos:
Short on Time? Take your Quote Online!
We get it- when you need Diesel Engine Parts, time is of the essence. That's why we've developed the HHP Online Quoting System.
Just fill out the form with your name, engine information, and the parts you need, and our ASE-Certified Technicians will get back to you with an estimate. It's as close to magic as a diesel engine gets!
Originally Posted December 26, 2018; Updated February 9, 2021